iruCandle Owner's Manual
Contents
Installing iruCandle to the coupler
- Loosen the fixing bolt on the back of the coupler with an M5 hex wrench anti-clockwise).
- Remove the shaft and put iruCandle in its place.
- Tighten the bolt again.
Attaching carrier attachments to iruCandle
Use the supplied bolts to secure the carrier attachment to iruCandle.
- If the carrier attachment has hole shape A, use Bolt I. If it has hole shape B, use Bolt II.
- If the bolt spacing of the carrier attachment is 26 mm, use holes 1 and 3. If the spacing is 16 mm, use holes 1 and 2.
